HP LaserJet Legacy
Printers - Memory Upgrade Specifications
This document provides part number and specification information for memory upgrades on various legacy HP LaserJet printers. NOTE: The following part numbers may change or become discontinued without further notice. HP
LaserJet 5L / 6Lseries Printers
|
|
1-MB SIMM |
C3939A |
|---|---|
|
2-MB SIMM |
C3938A |
|
4-MB SIMM |
C3148A |
The specifications for the above memory SIMMs are:
- DRAM
- 5 Volt
- 70 nanoseconds (or slower, such as 70ns or 100ns)
- Meets JEIDA Specifications
NOTE: An 8 MB SIMM from Kingston Technologies can be used in these printers.
HP
LaserJet 4P, 4 Plus, 4V, 5P, 5, 5Si, and 6P series printers
See Table 2 for memory SIMM part numbers for the HP LaserJet 4P, 4 Plus, 4V, 5P, 5, 5SI and 6P series printers.
Table 2: Memory part numbers
|
1-MB SIMM* |
C3130A (Discontinued) |
|---|---|
|
2-MB SIMM |
C3131A (Discontinued) |
|
4-MB SIMM |
C3132A (Discontinued) |
|
8-MB SIMM |
C3133A (Discontinued) |
|
16-MB SIMM* |
C3146A |
The specifications for the above memory SIMMs are:
- 72 Pin
- 32 Bit (No Parity)
- 70 nanoseconds (or slower, such as 80 ns or 90 ns)
- Presence Detect
NOTE: The 16-MB SIMM is not supported on the HP LaserJet 4P/4MP, and 4/4M printers. The 1-MB SIMM is not supported on the HP LaserJet 5Si/5Si MX and 5Si Mopier printers.
HP
LaserJet IIISi, 4 and 4Si series printers
See Table 3 for memory SIMM part numbers for the HP LaserJet IIISi, 4 and 4Si series printers.
Table 3: Memory part numbers
|
8-MB SIMM |
C2066A |
|---|
The specifications for the above SIMM are as follows:
- 72 pin
- 36 bit (Parity)
- 80 nanoseconds
- Presence Detect
NOTE:
This memory is also compatible with the HP LaserJet
4P/4MP, 4 Plus/4M Plus and 4V/4MV printers. However,
it is recommended to use the SIMM part numbers specific
to those printers.
Presence detect must be present on all the above listed
SIMMs.
HP LaserJet IIISi printers with serial numbers prior
to 3200 cannot use the 8 MB SIMM (C2066A).
Presence
detect requirements
Presence detect is the ability to report the size and speed of the SIMMs installed in an HP LaserJet printer to whomever is asking for the information. Without presence detect, the printer would be unable to recognize that additional memory had been installed.
HP
LaserJet 4L printer
The HP LaserJet 4L printer has a 1-MB memory upgrade. The part number is: C2024-69001.
Why do you need a printer memory upgrade? Benefits of upgrading your printer's memory
Installing a Flash DIMM in a Hewlett Packard LaserJet 2100/2200
Installing a Flash DIMM in the Hewlett Packard Laserjet 4000 Series
Installing a Flash DIMM in the Hewlett Packard Laserjet 8000/9000 series
Installing a Flash SIMM into the Hewlett Packard LaserJet 4P Printer
HP LaserJet Legacy Printers - Memory Upgrade Specifications
Click here for a complete list of Hewlett Packard printer memory configurations and OEM Part Numbers